diff options
| -rw-r--r-- | Dockerfile-debian-10-sqlite (renamed from Dockerfile-debian-python3-sqlite) | 0 | ||||
| -rw-r--r-- | Dockerfile-debian-11-sqlite | 151 | ||||
| -rw-r--r-- | Dockerfile-fedora-33-sqlite (renamed from Dockerfile-fedora-python3-sqlite) | 2 |
3 files changed, 152 insertions, 1 deletions
diff --git a/Dockerfile-debian-python3-sqlite b/Dockerfile-debian-10-sqlite index 7899731f..7899731f 100644 --- a/Dockerfile-debian-python3-sqlite +++ b/Dockerfile-debian-10-sqlite diff --git a/Dockerfile-debian-11-sqlite b/Dockerfile-debian-11-sqlite new file mode 100644 index 00000000..34f46a68 --- /dev/null +++ b/Dockerfile-debian-11-sqlite @@ -0,0 +1,151 @@ +# A Dockerfile for MediaGoblin hacking. +# +# IMPORTANT: This Dockerfile is not an officially supported approach to +# deploying MediaGoblin. It is experimental and intended for helping developers +# run the test suite. To deploy MediaGoblin, see: +# +# https://mediagoblin.readthedocs.io/en/master/siteadmin/deploying.html +# +# See Dockerfile-debian-10-sqlite for details. + +FROM debian:bullseye + +# Install bootstrap and configure dependencies. Currently requires virtualenv +# rather than the more modern python3-venv (should be fixed). +RUN apt-get update && apt-get install -y \ +automake \ +git \ +nodejs \ +npm \ +python3-dev \ +virtualenv + +# Install make and runtime dependencies. +# +# Excluding python3-celery here due to conflict with dist-packges for a +# compatible version of billiard. +RUN apt-get install -y \ +python3-alembic \ +python3-jsonschema \ +python3-kombu \ +python3-lxml \ +python3-migrate \ +python3-py \ +python3-pytest \ +python3-pytest-xdist \ +python3-snowballstemmer \ +python3-sphinx \ +python3-sphinxcontrib.websupport \ +python3-webtest + +# Install audio dependencies. +RUN apt-get install -y \ +gstreamer1.0-libav \ +gstreamer1.0-plugins-bad \ +gstreamer1.0-plugins-base \ +gstreamer1.0-plugins-good \ +gstreamer1.0-plugins-ugly \ +python3-gst-1.0 \ +python3-numpy + +# Install video dependencies. +RUN apt-get install -y \ +gir1.2-gst-plugins-base-1.0 \ +gir1.2-gstreamer-1.0 \ +gstreamer1.0-tools \ +python3-gi + +# Install raw image dependencies. +# +# Currently (March 2021), python3-py3exiv2 is only available in Debian Sid, so +# we need to install py3exiv2 from PyPI (later on in this Dockerfile). These are +# the build depedencies for py3exiv2. +RUN apt-get install -y \ +libexiv2-dev \ +libboost-python-dev + +# Install document (PDF-only) dependencies. +# TODO: Check that PDF tests aren't skipped. +RUN apt-get install -y \ +poppler-utils + +# Install LDAP depedencies. +RUN apt-get install -y python3-ldap + +# Install OpenID dependencies. +RUN apt-get install -y python3-openid + +# Create working directory. +RUN mkdir /opt/mediagoblin +RUN chown -R www-data:www-data /opt/mediagoblin +WORKDIR /opt/mediagoblin + +# Create /var/www because Bower writes some cache files into /var/www during +# make, failing if it doesn't exist. +RUN mkdir --mode=g+w /var/www +RUN chown root:www-data /var/www + +# Set up custom group to align with volume permissions for mounted +# "mediagoblin/mediagoblin" and "mediagoblin/user_dev". +# +# The problem here is that the host's UID, GID and mode are used in the +# container, but of course the container's user www-data is running under a +# different UID/GID so can't read or write to the volume. It seems like there +# should be a better approach, but we'll align volume permissions between host +# and container as per +# https://medium.com/@nielssj/docker-volumes-and-file-system-permissions-772c1aee23ca +RUN groupadd --system mediagoblin --gid 1024 && adduser www-data mediagoblin + +USER www-data + +# Copy upstream MediaGoblin into the image for use in the build process. +# +# This build process is somewhat complicated, because of Bower/NPM, translations +# and Python dependencies, so it's not really feasible just to copy over a +# requirements.txt like many Python Dockerfiles examples do. We need the full +# source. +# +# While it is possible to copy the source from the current directory like this: +# +# COPY --chown=www-data:www-data . /opt/mediagoblin +# +# that approach to lots of confusing problems when your working directory has +# changed from the default - say you've enabled some plugins or switched +# database type. So instead we're doing a git clone. We could potentially use +# `git archive` but this still wouldn't account for the submodules. +# +# TODO: Figure out a docker-only way to do the build and run from our local +# version, so that local changes are immediately available to the running +# container. Not as easy as it sounds. We have this working with docker-compose, +# but still uses upstream MediaGoblin for the build. +RUN git clone --depth=1 git://git.savannah.gnu.org/mediagoblin.git --branch master . +# RUN git clone --depth=1 https://gitlab.com/BenSturmfels/mediagoblin.git --branch master . +RUN git show --oneline --no-patch + +RUN ./bootstrap.sh +RUN VIRTUALENV_FLAGS='--system-site-packages' ./configure +RUN make + +# Install raw image library from PyPI. +RUN ./bin/pip install py3exiv2 + +# Run the tests. +# RUN ./bin/python -m pytest -rs ./mediagoblin/tests --boxed + +# Only safe if being run on a clean git checkout. Otherwise you may have already +# customised mediagoblin.ini to already install these. +RUN echo '[[mediagoblin.media_types.audio]]' >> mediagoblin.ini +RUN echo '[[mediagoblin.media_types.video]]' >> mediagoblin.ini +RUN echo '[[mediagoblin.media_types.raw_image]]' >> mediagoblin.ini + +# Prepare the SQLite database. +# +# TODO: Should probably be done at runtime. +RUN ./bin/gmg dbupdate +RUN ./bin/gmg adduser --username admin --password a --email admin@example.com +RUN ./bin/gmg makeadmin admin + +EXPOSE 6543/tcp + +# TODO: Is it possible to have a CMD here that is overriden by docker-compose? +CMD ["./lazyserver.sh", "--server-name=broadcast"] diff --git a/Dockerfile-fedora-python3-sqlite b/Dockerfile-fedora-33-sqlite index 3c471c07..c45bb7f5 100644 --- a/Dockerfile-fedora-python3-sqlite +++ b/Dockerfile-fedora-33-sqlite @@ -6,7 +6,7 @@ # # https://mediagoblin.readthedocs.io/en/master/siteadmin/deploying.html # -# See Dockerfile-debian-python3-sqlite for details. +# See Dockerfile-debian-10-sqlite for details. FROM fedora:33 |